China Professional 5,200 lbs Trailer Axle Beam with E-Z Lube Spindles – 95″ Hub Face 80″ Spring Center axle dump

Product Description

Round trailer axle beam measures 95″ from hub face to hub face (when hubs – sold separately – are mounted) and 80″ from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).

 

Features:

  • Round axle beam acts as part of your trailer’s suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer’s tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design – spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles – no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats, brake flanges, and spindles are welded on

 

Specs:

  • Weight capacity: 5,200 lbs
  • Hub-face-to-hub-face length: 95″
  • Spring-center-to-spring-center length: 80″
  • Tubing outer diameter: 3″
  • Bearings (sold separately):
    • Inner bearing: 25580
    • Outer bearing: LM67048
  • Brake flange configuration: 5 bolt
PN Axle Type Rating Hub Face to Hub Face Spring Center To Spring Center Tubing outer diameter Brake flange configuration Finish Bearings
TAB033  7,000 lbs Trailer Axle Beam 7,000 lbs. 95″ 80″ 3″ 5 Bolt  Black Paint 25580/20;14125A/14276

SELECTING THE PROPER TRAILER AXLE
When selecting an axle for your application remember to consider the following important specifications:

  • LOAD CAPACITY:  the load rating of the axle must support the maximum gross vehicle weight rating. For multiple axle trailers divide the GVWR by the number of axles to determine the minimum load capacity of each axle.

  • TRACK LENGTH:  measure your axle track length by determining the distance between the center of 1 tire to the center of the other tire. A more precise measurement can be made by measuring the distance from 1 ‘HUB FACE’ to the other. The hub face is also known as the mounting surface where the wheel studs are located.

  • SPRING CENTERS:  measure the distance from the center of 1 spring to the center of the other.
    NOTE: not required for replacement torsion axles

  • OVERALL LENGTH:  measure the distance from the very end of an axle’s spindle to the very end of the opposite spindle.

  • AXLE STYLE:  important when reusing old mounting hardware and also for proper tire clearance. Includes straight axles (round or square), drop axles with offset spindles, and torsion axles. Also consider spindle size when reusing existing hubs or drums.

  • AXLE CAMBER:  Most trailer axles are designed with a bend in the tube that will deflect when the load (weight of the trailer) is applied. This will theoretically bring the trailer wheel camber toward a 0 value that is the best setting for most trailer applications. This will allow the tires to wear evenly and allow the longest tread life. Camber can be affected by damage to the axle. For example, if the axle spindle is bent, this will usually cause a negative camber on that side which will cause excess tread wear on the inside of that tire.

     

 

HangZhou CZPT Machinery Co., Ltd is a professional manufacturer of trailer parts in HangZhou, ZHangZhoug Province, China since 2016.

 

We can produce many trailer parts & accessories as follows: Towbars, axles, brake drums, hubs, brake disc, bearings, springs and springs and suspension kits, couplings, mudguards, U-Bolts, Jockey Wheels, keel rollers and brackets, wobble roller, wheel spacer, equalizers and all accessories related to trailers.

If you can send me the drawings or specifications of the trailer parts, mechanical parts and wheels, we can give you our price.

Q1: Do you have factory?
A: Yes, we have our own factory, own engineers, we can meet custom’s unique requirement.

Q2: Can I have a sample order?
A: Yes, welcome sample order to test and check quality. Mixed samples are acceptable.

Q3: It’s OK to print my logo on your product?
A: Yes, we can according to your exact requirement.

Q4:How do you ship the goods and how long does it take arrive?
A: We usually shipped by DHL, UPS, FedEx, it usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5: What is your advantages?
A: We are professional supplier for more than 10 years, we always put the quality and price at the first place. At the same time, our products are exported to various countries, we have full experience to solve thorny problems.

If you want to know about our products and us, welcome to enquiry and email me.thanks

1-Welcome OEM

  1. You can use your own brands or ours, if you use our brand, our professional team will help you design the packing.

2-Our service

  1. You inquiry related to our products or prices will be replied in 24 hours.
  2. Well-trained and experienced staffs to answer all your enquirys in fluent English.
  3. Protection of your sales area, ideas of your design and all your private information.
  4. We have a QC team, every product will be checked by them before packed.

3-Welcome to visit

  1. When you come to our company visit us, we will arrange a car for picking up and help you book hotel. If you want to visit the local scenic spot, our colleague will accompany you.

4-Warranty

  1. Customer should be provide the video and the pictures for the problem products.
  2. Products returned within the warranty period must bear product number & date code.

5-After service

  1. In production and after delivery, we will track on time and tell you goods situation.
  2. When the goods arrived, if you find any design and quality questions, or difference from your samples, please feel free to contact us, we will find the question and solve it with you.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Condition: New
Axle Number: 2
Application: Trailer
Certification: ASTM, CE, DIN, ISO
Material: Steel
Type: Front Axles
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

beam axle

What innovations or advancements have been made in beam axle technology?

Beam axle technology, while known for its simplicity and durability, has seen innovations and advancements over the years to improve performance and versatility. Some notable developments in beam axle technology include:

1. Air Suspension:

One significant advancement is the integration of air suspension systems with beam axles. Air suspension allows for adjustable ride height and load-leveling capabilities, enhancing ride comfort and load-carrying capacity. This innovation is particularly valuable for commercial vehicles.

2. Steering Mechanisms:

Modern beam axles in some vehicles incorporate advanced steering mechanisms to improve maneuverability. Examples include rack-and-pinion steering or electronic power steering, which enhances control and handling, especially in heavy-duty and off-road applications.

3. High-Strength Materials:

Advancements in materials have led to the use of high-strength alloys and composite materials in beam axle construction. These materials offer improved strength-to-weight ratios, reducing overall weight while maintaining durability. Lighter axles contribute to better fuel efficiency in vehicles.

4. Redesigned Suspension Geometry:

Manufacturers have optimized the suspension geometry in some beam axle configurations to reduce vibration, enhance stability, and provide better handling. These improvements result in a more comfortable and controlled ride for both passengers and drivers.

5. Improved Lubrication Systems:

Better lubrication systems have been developed to ensure smoother operation and extended axle component lifespan. These systems help prevent wear and reduce maintenance requirements.

6. Enhanced Load-Carrying Capacity:

Advancements in axle design and materials have allowed for increased load-carrying capacity without compromising axle integrity. This is crucial for commercial vehicles that transport heavy loads.

7. Adaptive Damping Systems:

Some vehicles equipped with beam axles feature adaptive damping systems that adjust shock absorber settings in real-time based on road conditions and driving dynamics. This results in a smoother and more controlled ride, especially when the vehicle is fully loaded.

8. Noise and Vibration Reduction:

Manufacturers have focused on reducing noise and vibration in vehicles with beam axles. Improved bushings, dampers, and mounting systems help minimize unwanted noise and vibration, contributing to a quieter and more comfortable driving experience.

9. Maintenance and Diagnostic Technology:

Advancements in diagnostics and monitoring technology allow for proactive maintenance of beam axles. Sensor systems can detect issues early, improving safety and reducing unplanned downtime for maintenance and repairs.

Summary:

Beam axle technology has evolved to meet the changing demands of modern vehicles. These innovations enhance ride comfort, safety, load-carrying capacity, and overall performance, making beam axles a competitive choice for a wide range of applications, including commercial vehicles and off-road machines.

beam axle

Can you describe the maintenance and repair considerations for beam axles?

Maintenance and repair of beam axles, also known as solid axles or live axles, are essential to ensure the longevity and proper functioning of a vehicle. Here are some key maintenance and repair considerations:

Maintenance:

  • 1. Lubrication: Regularly inspect and lubricate the axle’s components, such as the bearings, bushings, and kingpins. Proper lubrication helps reduce friction and wear.
  • 2. Inspection: Periodically inspect the axle for signs of damage, wear, or corrosion. Check for leaks from the axle’s seals and inspect the axle housing for cracks or dents.
  • 3. Tire Alignment: Proper tire alignment is crucial to prevent uneven tire wear and maintain vehicle stability. Ensure that the wheels are aligned correctly to minimize stress on the axle components.
  • 4. Wheel Balancing: Imbalanced wheels can cause vibrations and additional stress on the axle. Regularly balance the wheels to prevent premature wear of axle components.
  • 5. Tightening Fasteners: Check and tighten fasteners, such as U-bolts and mounting brackets, to ensure they are secure and prevent axle misalignment.

Repair:

  • 1. Bearing Replacement: If you notice excessive play, noise, or vibrations in the wheel, it may be a sign of bearing wear. Bearings should be replaced promptly to prevent further damage to the axle.
  • 2. Seals and Gaskets: Leaking seals and gaskets should be replaced to prevent oil or grease loss and maintain proper lubrication of axle components.
  • 3. Bushings and Kingpins: Worn or damaged bushings and kingpins can affect steering and handling. Replacement may be necessary to restore proper function.
  • 4. Axle Straightening: In cases of minor axle damage or bending, some axles can be straightened and repaired. However, severe damage may require axle replacement.
  • 5. Welding and Fabrication: In the event of cracks or structural damage to the axle housing, welding and fabrication may be required. This should be performed by a skilled professional to ensure the axle’s integrity.
  • 6. Alignment: Proper alignment is critical to prevent uneven tire wear and handling issues. If the axle is misaligned, it should be realigned by a professional technician.

It’s important to note that the complexity of maintenance and repair tasks may vary depending on the type of vehicle and the specific design of the beam axle. Additionally, regular inspections and maintenance can help detect issues early, preventing more extensive and costly repairs in the long run. When performing maintenance and repairs on beam axles, it’s recommended to consult the vehicle’s service manual and seek assistance from qualified mechanics when needed.

beam axle

Are there different types of beam axles for various vehicle applications?

Yes, there are different types of beam axles designed for various vehicle applications. These variations in beam axles are tailored to meet the specific needs of different types of vehicles and usage scenarios. Here are some of the different types:

1. Front Beam Axles:

Front beam axles are typically used in commercial and heavy-duty trucks, as well as some off-road and industrial vehicles. They are designed to provide robust load-bearing capabilities and stability for front-wheel drive vehicles, especially those used in construction, mining, and transportation of heavy loads.

2. Rear Beam Axles:

Rear beam axles are commonly used in various vehicle types, including trucks, vans, and off-road vehicles. They offer load-carrying capacity and are suitable for applications where traction and durability are important. In trucks, the rear beam axle often supports the weight of the cargo.

3. Off-Road Beam Axles:

Off-road vehicles, such as 4×4 trucks and SUVs, use specialized beam axles designed for rugged terrain. These beam axles provide increased articulation and durability, allowing the vehicle to maintain traction and control in challenging off-road conditions.

4. Independent Beam Axles:

Some vehicles, particularly in the realm of all-terrain and recreational vehicles, feature independent beam axles. These axles combine the strength of beam axles with the ability to articulate independently, offering a compromise between load-bearing capacity and off-road performance.

5. Solid and Tube Beam Axles:

Beam axles can come in different designs, including solid and tube axles. Solid beam axles consist of a single, solid shaft, while tube axles are hollow, reducing weight while maintaining strength. The choice depends on the vehicle’s requirements.

6. Retro and Classic Beam Axles:

In the context of classic and retro vehicles, beam axles are sometimes retained for authenticity. Modern vehicles with retro styling may incorporate beam axles to capture the aesthetics and character of older vehicle designs.

7. Tandem Beam Axles:

In heavy-duty trucks and trailers, tandem beam axles are often used. These axles are arranged in tandem pairs to distribute the load more evenly and improve load-bearing capacity, making them suitable for long-haul transportation.

The choice of beam axle type depends on the intended use, vehicle design, and the specific demands of the application. Manufacturers select the appropriate beam axle configuration to optimize vehicle performance, load-carrying capacity, and durability for a given scenario.

China Professional 5,200 lbs Trailer Axle Beam with E-Z Lube Spindles - 95China Professional 5,200 lbs Trailer Axle Beam with E-Z Lube Spindles - 95
editor by CX 2024-02-25

Tagshub

Recent Posts